Call (865) 236-0833
Fall Commercial Discount: 10% Off Projects Over 1,000 Sq Ft — Claim Free Estimate Today!
Commercial epoxy floor installed in an Alcoa TN industrial facility by Knoxville Concrete Floors

#1 Polished Concrete & Epoxy Contractor in Alcoa, TN

Alcoa concrete polishing and epoxy flooring Alcoa — diamond-polished floors, stained concrete, and commercial epoxy systems for Blount County homes, garages, and businesses. Free on-site estimates.

Alcoa is the industrial and commercial heart of Blount County, home to manufacturing facilities, distribution centers, and the McGhee Tyson area — with growing residential development alongside. Knoxville Concrete Floors is the #1 polished concrete and epoxy contractor serving Alcoa, TN.

We install diamond-polished concrete, stained concrete, and epoxy flooring systems throughout Alcoa and Blount County — for industrial slabs, warehouse aisles, commercial spaces, and residential garages that need to stand up to heavy use.

Serving Alcoa, TN

Local crews across Blount County

Knoxville Concrete Floors is based in the Knoxville metro and serves Alcoa (37701) and the surrounding Blount County communities. Local crews mean fast scheduling, quick warranty follow-up, and accountability you can drive to.

Alcoa project photos

Real Blount County floors

Commercial epoxy floor in an Alcoa TN industrial facility
Industrial epoxy · Alcoa
Polished concrete floor in an Alcoa TN warehouse
Warehouse polish · Blount County
High-gloss concrete floor in an Alcoa TN commercial space
Alcoa commercial work

Alcoa concrete polishing for industrial and warehouse slabs

Alcoa concrete polishing is built for the demands of Blount County industry — densified, refined surfaces that handle forklift traffic, equipment, and routine cleaning without waxing or resealing.

For warehouse aisles and distribution centers, polished concrete improves light reflectivity (lowering lighting costs) and reduces cleaning labor compared with coatings that need reapplication.

Epoxy flooring Alcoa — chemical and traffic resistant

Epoxy flooring in Alcoa is specified for chemical resistance, hot-tire pickup, and heavy equipment traffic. We use high-solids commercial-grade epoxy with full-flake and metallic options for manufacturing floors, garages, and warehouse aisles.

For Alcoa facilities with higher chemical exposure, we can hybrid-specify sealed zones at service areas while the main floor stays polished.

Serving Alcoa and Blount County

Schedule a free on-site estimate in Alcoa today. We measure the slab, assess conditions, and deliver a written square-foot price with no obligation. Local Blount County crews mean fast scheduling and quick warranty follow-up.

Instant Cost & Quote Calculator

Get an instant price range in 10 seconds

Pick your project type, square footage, and finish level for a real-time estimated range. Then lock in a free on-site inspection and we hand you the official written quote — no obligation, no subcontracted crews.

Estimated Price Range

$6000 – $9000

Based on typical Knoxville-area per-square-foot pricing for high-gloss polish on a 500 – 1,500 sq ft residential garage slab. Final price is confirmed on-site after we assess prep, cracks, and slab condition.

Serves all Knoxville metro Free on-site inspection

Lock in your free on-site inspection & official quote

8 + 6 =

No obligation. Official quote delivered on-site.

Our concrete flooring services in Alcoa

From diamond polishing to industrial epoxy and joint repair, explore the systems we install for Alcoa homes and businesses.

Alcoa concrete flooring FAQ

Do you serve Alcoa and Blount County?+

Yes. Alcoa and Blount County are a core part of our service area. We schedule free on-site estimates throughout the 37701 zip code.

Can you polish large Alcoa warehouse slabs?+

Yes. We run commercial grinding and polishing equipment and routinely finish multi-thousand-square-foot warehouse and industrial slabs, scheduling around operating hours.

People Also Ask

People also ask

How much does polished concrete cost per square foot in Knoxville, TN?+

Polished concrete in the Knoxville metro typically runs $3–$12 per square foot installed. Residential floors usually land between $4–$8 per square foot, while commercial projects can dip to $3–$5 per square foot on large, clean slabs. The grind level drives most of the price difference: a matte or satin finish (200–400 grit) sits at the low end, a satin-to-semi-gloss (800 grit) sits mid-range, and a high-gloss mirror finish (1500–3000 grit with aggregate exposure) reaches $8–$12 per square foot. We deliver a written per-square-foot price after an on-site estimate.

Is polished concrete cheaper than epoxy flooring or hardwood?+

In most Knoxville homes and businesses, polished concrete is cheaper than hardwood and comparable to or slightly less than a premium epoxy system. Polished concrete runs about $3–$12 per square foot installed, epoxy coatings $4–$12 per square foot, and installed hardwood $8–$20+ per square foot. Polished concrete also avoids the ongoing refinishing and recoating costs that hardwood and epoxy carry, so the lifetime cost is usually the lowest of the three.

What factors increase the cost of concrete polishing or epoxy application?+

The biggest cost adders are slab repair, moisture mitigation, and diamond grinding prep. Cracks, spalls, and uneven slabs must be patched or leveled before finishing; oil-stained or contaminated concrete requires deeper grinding; and slabs with high moisture vapor pressure may need a moisture-mitigation system before epoxy will bond. Other adders include small square footage (minimum charges), heavy aggregate exposure, decorative dyes and stains, cove base installation, and after-hours or phased commercial scheduling. We itemize every one of these on your written estimate.

Is polished concrete slippery when wet?+

A high-gloss polished floor can be slick when wet, but slip resistance is controllable. We can stop at a lower grit (400–800) for more traction, apply an anti-slip densifier guard, or add grit additive to the topcoat on epoxy systems. For commercial kitchens, entries, restrooms, and other wet zones we specify finishes that meet OSHA-compliant traction standards. Outdoors or in wet areas, a satin finish with anti-slip treatment is the safer choice over a full mirror polish.

How long do polished concrete floors and garage epoxy coatings last?+

With minimal maintenance, polished concrete floors commonly deliver 20+ years of service in residential settings and 10–20 years in heavy-traffic commercial environments before a refresh burnish is needed — there is no coating to peel or wear off. A properly installed garage epoxy system with the right prep and polyaspartic or urethane topcoat typically lasts 10–20+ years under normal use. Both systems far outlast DIY epoxy kits, which often fail within 1–3 years.

Can you polish old, cracked, or uneven concrete slabs?+

Yes. Older, cracked, or uneven slabs are common candidates, but they require prep before grinding. We fill cracks and control joints with polyurea or semi-rigid joint filler, patch spalls and popouts with a concrete repair mortar, and address birdbaths or high spots with targeted grinding or leveling. Once the slab is sound and flat, we diamond-polish through the grit sequence as normal. Some hairline cracks remain visible as character; larger structural issues are flagged before we start so you know what to expect.

How long does the polishing or epoxy coating process take?+

A typical residential project (400–600 sq ft garage or basement) takes 1–2 days for polished concrete and 1–3 days for epoxy, including prep, coating, and cure. Commercial spaces of 2,000+ sq ft usually take 3–5 days depending on slab condition, finish level, and whether the work is phased around your operating hours. Polished concrete has no long cure time; epoxy needs 12–24 hours before light foot traffic and up to 48 hours before vehicle traffic.

How soon can I walk or park my car on newly finished floors?+

For polished concrete, light foot traffic is usually possible the same day the final grit is complete — full furniture and rugs can go back within 24 hours. For epoxy and polyaspartic garage coatings, light foot traffic is typically safe within 12 hours and vehicle traffic within 48 hours, depending on product, temperature, and humidity. We give you exact walk-on and drive-on times for your specific system before we leave the job.

How do I properly clean and maintain polished concrete or garage epoxy?+

Dust mop or auto-scrub regularly and clean with a neutral pH cleaner — never acidic, citrus, or solvent degreasers, which etch polished concrete and dull epoxy topcoats. Blot spills promptly, avoid abrasive pads and power scrubbers, and place walk-off mats at entries to trap grit. For high-gloss polished floors, reapply a burnishing guard once a year; for epoxy, a clear re-topcoat every several years keeps it fresh. No waxing, stripping, or recoating is required for polished concrete.

Do you offer commercial, industrial, and residential concrete polishing in Knox County?+

Yes. We install commercial, industrial, and residential polished concrete and epoxy coatings throughout Knox County and the greater Knoxville metro — including Knoxville, Farragut, Powell, Maryville, Oak Ridge, Clinton, Alcoa, and surrounding areas in Anderson and Blount counties. Our in-house crews handle everything from single-car residential garages to 8,000+ sq ft warehouses, retail stores, restaurants, and manufacturing facilities. Every estimate is free and on-site.

Are your coatings resistant to garage oil spills, chemicals, and East Tennessee freeze-thaw cycles?+

Yes. Our high-solids epoxy and polyaspartic systems are engineered to resist motor oil, hydraulic fluid, road salt, solvents, and common shop chemicals — blot spills promptly and they will not stain or lift the coating. The seamless, non-porous surface also stands up to East Tennessee freeze-thaw cycling because there is no porous surface for moisture to enter and expand. For heavier chemical exposure we specify novolac or vinyl ester systems. Proper mechanical prep is what keeps the coating bonded through seasonal temperature swings.

Free Alcoa estimate

Get your Alcoa square-foot price

Tell us about your slab in Alcoa. We schedule an on-site walkthrough across Blount County and deliver a written price — no obligation.

Call (865) 236-0833

Free on-site estimate

Get a free quote

6 + 5 =

We answer every request personally. Your details are never sold or shared.

Polished concrete & epoxy in Alcoa, built right

Free on-site estimates across Alcoa and Blount County. Call (865) 236-0833.