
Seamless, chemical-resistant epoxy floor coatings engineered for garages, commercial kitchens, and industrial facilities — with color flake and metallic finish options.
Applications
High-solids epoxy with polyaspartic topcoat that resists hot-tire pickup, oil, and road salt. Available in solid colors, color flake, and metallic finishes.
USDA-compliant, seamless, chemical-resistant systems with optional anti-slip texture for wet, greasy environments that meet health-code requirements.
Novolac and vinyl ester systems engineered for solvent, acid, and hydraulic-fluid exposure in machine shops, auto bays, and manufacturing facilities.
Finish Options
Why Epoxy
Before & After
Slide the handle to compare a bare, stained slab with the finished epoxy floor — the kind of result our Knoxville crews deliver every week.
After
BeforeFAQ
Epoxy floor coatings in the Knoxville metro typically run about $4–$10 per square foot installed, depending on slab condition, prep, square footage, and finish (solid color, full-flake, or metallic). Metallic and custom systems sit at the upper end. We provide a written per-square-foot price after an on-site estimate.
A properly installed epoxy floor with the right prep and topcoat commonly delivers many years of service under normal use. Commercial or chemically aggressive environments may need a re-topcoat sooner. With sound prep and chemistry, the system outlasts DIY kits by a wide margin.
Many residential floors return to light foot traffic within 12 hours and vehicle traffic within 48 hours depending on product, temperature, humidity, and topcoat chemistry. We give you exact cure and drive-on times for your specific product stack.
Hot tire pickup is a common failure of thin DIY kits. Our high-solids epoxy base coats with proper mechanical prep and polyaspartic or urethane topcoats are engineered to resist that peel cycle.
A glossy epoxy film can be slippery when wet. We can add anti-slip aggregate to the topcoat for wet areas, garages, and commercial kitchens to meet OSHA-compliant traction. Flake broadcasts also add natural texture.
Failing coatings must be removed by grinding first — bonding over unknown paint is a risk we will not take. Oil-stained areas are degreased and ground deeper. A stained slab is actually a good candidate for epoxy because the coating hides imperfections that polishing would reveal.
People Also Ask
Polished concrete in the Knoxville metro typically runs $3–$12 per square foot installed. Residential floors usually land between $4–$8 per square foot, while commercial projects can dip to $3–$5 per square foot on large, clean slabs. The grind level drives most of the price difference: a matte or satin finish (200–400 grit) sits at the low end, a satin-to-semi-gloss (800 grit) sits mid-range, and a high-gloss mirror finish (1500–3000 grit with aggregate exposure) reaches $8–$12 per square foot. We deliver a written per-square-foot price after an on-site estimate.
In most Knoxville homes and businesses, polished concrete is cheaper than hardwood and comparable to or slightly less than a premium epoxy system. Polished concrete runs about $3–$12 per square foot installed, epoxy coatings $4–$12 per square foot, and installed hardwood $8–$20+ per square foot. Polished concrete also avoids the ongoing refinishing and recoating costs that hardwood and epoxy carry, so the lifetime cost is usually the lowest of the three.
The biggest cost adders are slab repair, moisture mitigation, and diamond grinding prep. Cracks, spalls, and uneven slabs must be patched or leveled before finishing; oil-stained or contaminated concrete requires deeper grinding; and slabs with high moisture vapor pressure may need a moisture-mitigation system before epoxy will bond. Other adders include small square footage (minimum charges), heavy aggregate exposure, decorative dyes and stains, cove base installation, and after-hours or phased commercial scheduling. We itemize every one of these on your written estimate.
A high-gloss polished floor can be slick when wet, but slip resistance is controllable. We can stop at a lower grit (400–800) for more traction, apply an anti-slip densifier guard, or add grit additive to the topcoat on epoxy systems. For commercial kitchens, entries, restrooms, and other wet zones we specify finishes that meet OSHA-compliant traction standards. Outdoors or in wet areas, a satin finish with anti-slip treatment is the safer choice over a full mirror polish.
With minimal maintenance, polished concrete floors commonly deliver 20+ years of service in residential settings and 10–20 years in heavy-traffic commercial environments before a refresh burnish is needed — there is no coating to peel or wear off. A properly installed garage epoxy system with the right prep and polyaspartic or urethane topcoat typically lasts 10–20+ years under normal use. Both systems far outlast DIY epoxy kits, which often fail within 1–3 years.
Yes. Older, cracked, or uneven slabs are common candidates, but they require prep before grinding. We fill cracks and control joints with polyurea or semi-rigid joint filler, patch spalls and popouts with a concrete repair mortar, and address birdbaths or high spots with targeted grinding or leveling. Once the slab is sound and flat, we diamond-polish through the grit sequence as normal. Some hairline cracks remain visible as character; larger structural issues are flagged before we start so you know what to expect.
A typical residential project (400–600 sq ft garage or basement) takes 1–2 days for polished concrete and 1–3 days for epoxy, including prep, coating, and cure. Commercial spaces of 2,000+ sq ft usually take 3–5 days depending on slab condition, finish level, and whether the work is phased around your operating hours. Polished concrete has no long cure time; epoxy needs 12–24 hours before light foot traffic and up to 48 hours before vehicle traffic.
For polished concrete, light foot traffic is usually possible the same day the final grit is complete — full furniture and rugs can go back within 24 hours. For epoxy and polyaspartic garage coatings, light foot traffic is typically safe within 12 hours and vehicle traffic within 48 hours, depending on product, temperature, and humidity. We give you exact walk-on and drive-on times for your specific system before we leave the job.
Dust mop or auto-scrub regularly and clean with a neutral pH cleaner — never acidic, citrus, or solvent degreasers, which etch polished concrete and dull epoxy topcoats. Blot spills promptly, avoid abrasive pads and power scrubbers, and place walk-off mats at entries to trap grit. For high-gloss polished floors, reapply a burnishing guard once a year; for epoxy, a clear re-topcoat every several years keeps it fresh. No waxing, stripping, or recoating is required for polished concrete.
Yes. We install commercial, industrial, and residential polished concrete and epoxy coatings throughout Knox County and the greater Knoxville metro — including Knoxville, Farragut, Powell, Maryville, Oak Ridge, Clinton, Alcoa, and surrounding areas in Anderson and Blount counties. Our in-house crews handle everything from single-car residential garages to 8,000+ sq ft warehouses, retail stores, restaurants, and manufacturing facilities. Every estimate is free and on-site.
Yes. Our high-solids epoxy and polyaspartic systems are engineered to resist motor oil, hydraulic fluid, road salt, solvents, and common shop chemicals — blot spills promptly and they will not stain or lift the coating. The seamless, non-porous surface also stands up to East Tennessee freeze-thaw cycling because there is no porous surface for moisture to enter and expand. For heavier chemical exposure we specify novolac or vinyl ester systems. Proper mechanical prep is what keeps the coating bonded through seasonal temperature swings.
Request a Free Quote
Tell us about the space and how it is used. We assess the slab, recommend the right system for your traffic and chemical exposure, and deliver a written square-foot price — no pressure, no subcontracted crews.
Call (865) 236-0833Free on-site estimates across Knoxville, Clinton, Oak Ridge, and the greater East Tennessee area.