Call (865) 236-0833
Fall Commercial Discount: 10% Off Projects Over 1,000 Sq Ft — Claim Free Estimate Today!
High-gloss polished concrete floor installed in a Farragut, TN garage by Knoxville Concrete Floors

Polished Concrete in Farragut, TN

Custom diamond-polished concrete floors, staining, and epoxy coatings for Farragut homes, garages, and commercial spaces across west Knox County.

Farragut is one of west Knox County’s most established communities, with a mix of upscale residential subdivisions, retail corridors along Kingston Pike, and growing commercial build-out near Turkey Creek. Property owners here expect finishes that look refined and hold up to daily use — which is exactly what polished concrete delivers. Knoxville Concrete Floors installs diamond-polished concrete, stained concrete, and epoxy flooring systems throughout Farragut and the surrounding 37934 zip code.

Our crews handle everything from a single residential garage to multi-thousand-square-foot retail and office slabs. Because we run our own commercial grinding and coating equipment, there is no subcontractor guessing — just a written square-foot price, a clear schedule, and a finish specified for how you actually use the floor.

This Farragut landing page covers local project types, finish and color options, concrete grinding and surface prep, staining, epoxy pricing per square foot, and what to expect from a free on-site estimate in west Knox County.

Project photos

Real floors. Real Knoxville-area work.

Mirror-finish polished concrete floor in a Farragut TN residential garage
High-gloss garage polish · Farragut
Polished concrete garage floor in a west Knox County Farragut home
West Knox County residential work
Full-flake epoxy floor installed for a Farragut commercial space
Turkey Creek-area commercial epoxy

Polished concrete for Farragut homes and garages

Residential finishes built for west Knox County living

Farragut homeowners increasingly choose polished concrete for garages, basements, and modern open-concept interiors. The structural slab becomes the finished floor — no separate covering to replace, no wax cycle, and a hard, easy-clean surface that handles East Tennessee red clay tracked in from the yard.

We tune sheen to the space: a satin finish for living areas where glare from large windows is unwanted, or a high-gloss polish for show garages that doubles the apparent brightness under LED fixtures. Stained concrete contractors in Knox County often lean on integral dyes and reactive stains to warm up gray slabs, and we sample color on your concrete before committing.

For attached garages, many Farragut clients pair interior polish with a full-flake or metallic garage epoxy system so the whole lower level reads as one intentional project.

  • Satin, semi-gloss, and high-gloss residential sheens
  • Stained and dyed concrete for custom color
  • Salt-and-pepper or cream finish exposure
  • Compatible with radiant floor heat
  • Low-allergen alternative to carpet
  • Bundle garage epoxy with interior polish

Commercial polished concrete near Turkey Creek

Retail, office, and light-industrial slabs

Commercial build-out along Kingston Pike and the Turkey Creek corridor means more retail, medical office, and flex-space slabs that need a durable finished floor. Polished concrete is the low-maintenance answer: densified, refined, and burnished to a sheen that improves light reflectivity and reduces cleaning labor compared with VCT.

For Farragut businesses, we schedule grinding and polishing around operating hours, phase aisles so you can stay open, and use HEPA-connected dust containment to keep inventory and fixtures clean. Concrete grinding Knoxville crews trust is about controlled prep — removing old coatings, leveling high spots, and opening the surface for densification.

High-traffic entries and restrooms can be hybrid-specified with epoxy or sealed zones where chemical and slip exposure is highest, while the main floor stays polished.

Concrete grinding, staining, and surface prep

The work behind the finish

Every polished floor starts with concrete grinding. We remove existing glue, thinset, mastic, or failed coatings, then progress through metal-bond diamond grits to refine the surface. On older Farragut slabs with patches or coatings, honest prep pricing is included up front rather than discovered mid-job.

Stained concrete lets Knox County property owners move beyond gray. Reactive chemical stains produce variegated earth tones; integral dyes offer consistent modern color. We seal stained floors with appropriate guard products and can burnish to the sheen you want.

Crack and spall repair is addressed before polishing. Hairline cracks can stay as character; moving cracks get stitched or filled depending on your style goals and slab movement.

Epoxy flooring cost per square foot in Farragut

Pricing you can plan around

Farragut clients regularly ask about epoxy flooring cost per square foot. Residential garage epoxy typically runs $5–$12 per square foot depending on prep, flake vs. metallic, and square footage. Commercial epoxy systems vary with chemical-resistance and slip-profile requirements. Polished concrete generally runs $4–$8 per square foot residential, with commercial pricing driven by finish level and slab condition.

You receive a written per-square-foot price after the on-site estimate — no vague ranges and no surprise add-ons once work begins. Square footage, prep, finish, and timeline are all itemized.

Bundling polish and epoxy across a property often improves scheduling efficiency and total value. We are happy to quote both systems together.

Serving Farragut and west Knox County

Local crews, local accountability

Knoxville Concrete Floors serves Farragut, Concord, Hardin Valley, and the broader west Knox County area. Local crews mean warranty follow-up is a short drive, not a national call center, and punch visits happen quickly.

Schedule a free on-site estimate in Farragut today. We measure the slab, assess conditions, and deliver a written square-foot price with no obligation to proceed.

Instant Cost & Quote Calculator

Get an instant price range in 10 seconds

Pick your project type, square footage, and finish level for a real-time estimated range. Then lock in a free on-site inspection and we hand you the official written quote — no obligation, no subcontracted crews.

Estimated Price Range

$6000 – $9000

Based on typical Knoxville-area per-square-foot pricing for high-gloss polish on a 500 – 1,500 sq ft residential garage slab. Final price is confirmed on-site after we assess prep, cracks, and slab condition.

Serves all Knoxville metro Free on-site inspection

Lock in your free on-site inspection & official quote

6 + 5 =

No obligation. Official quote delivered on-site.

Frequently asked questions

Do you polish concrete in Farragut garages?+

Yes. Residential garage polish and epoxy are among our most common Farragut projects. We can finish a typical two-car garage in 1–2 days with no long cure time for polished systems.

Can stained concrete match my home’s palette?+

We sample stains and dyes on your slab before committing. Reactive stains give earthy variegation; dyes offer consistent modern color. Most west Knox County homes pair well with soft gray, charcoal, or warm taupe.

How much does epoxy flooring cost per square foot in Farragut?+

Residential garage epoxy typically runs $5–$12 per square foot; commercial systems vary with spec. You get a written per-square-foot price after the on-site estimate.

Can you work around my business hours near Turkey Creek?+

Yes. We phase commercial work in aisles and schedule after-hours grinding when needed so your Farragut business can stay open.

People Also Ask

People also ask

How much does polished concrete cost per square foot in Knoxville, TN?+

Polished concrete in the Knoxville metro typically runs $3–$12 per square foot installed. Residential floors usually land between $4–$8 per square foot, while commercial projects can dip to $3–$5 per square foot on large, clean slabs. The grind level drives most of the price difference: a matte or satin finish (200–400 grit) sits at the low end, a satin-to-semi-gloss (800 grit) sits mid-range, and a high-gloss mirror finish (1500–3000 grit with aggregate exposure) reaches $8–$12 per square foot. We deliver a written per-square-foot price after an on-site estimate.

Is polished concrete cheaper than epoxy flooring or hardwood?+

In most Knoxville homes and businesses, polished concrete is cheaper than hardwood and comparable to or slightly less than a premium epoxy system. Polished concrete runs about $3–$12 per square foot installed, epoxy coatings $4–$12 per square foot, and installed hardwood $8–$20+ per square foot. Polished concrete also avoids the ongoing refinishing and recoating costs that hardwood and epoxy carry, so the lifetime cost is usually the lowest of the three.

What factors increase the cost of concrete polishing or epoxy application?+

The biggest cost adders are slab repair, moisture mitigation, and diamond grinding prep. Cracks, spalls, and uneven slabs must be patched or leveled before finishing; oil-stained or contaminated concrete requires deeper grinding; and slabs with high moisture vapor pressure may need a moisture-mitigation system before epoxy will bond. Other adders include small square footage (minimum charges), heavy aggregate exposure, decorative dyes and stains, cove base installation, and after-hours or phased commercial scheduling. We itemize every one of these on your written estimate.

Is polished concrete slippery when wet?+

A high-gloss polished floor can be slick when wet, but slip resistance is controllable. We can stop at a lower grit (400–800) for more traction, apply an anti-slip densifier guard, or add grit additive to the topcoat on epoxy systems. For commercial kitchens, entries, restrooms, and other wet zones we specify finishes that meet OSHA-compliant traction standards. Outdoors or in wet areas, a satin finish with anti-slip treatment is the safer choice over a full mirror polish.

How long do polished concrete floors and garage epoxy coatings last?+

With minimal maintenance, polished concrete floors commonly deliver 20+ years of service in residential settings and 10–20 years in heavy-traffic commercial environments before a refresh burnish is needed — there is no coating to peel or wear off. A properly installed garage epoxy system with the right prep and polyaspartic or urethane topcoat typically lasts 10–20+ years under normal use. Both systems far outlast DIY epoxy kits, which often fail within 1–3 years.

Can you polish old, cracked, or uneven concrete slabs?+

Yes. Older, cracked, or uneven slabs are common candidates, but they require prep before grinding. We fill cracks and control joints with polyurea or semi-rigid joint filler, patch spalls and popouts with a concrete repair mortar, and address birdbaths or high spots with targeted grinding or leveling. Once the slab is sound and flat, we diamond-polish through the grit sequence as normal. Some hairline cracks remain visible as character; larger structural issues are flagged before we start so you know what to expect.

How long does the polishing or epoxy coating process take?+

A typical residential project (400–600 sq ft garage or basement) takes 1–2 days for polished concrete and 1–3 days for epoxy, including prep, coating, and cure. Commercial spaces of 2,000+ sq ft usually take 3–5 days depending on slab condition, finish level, and whether the work is phased around your operating hours. Polished concrete has no long cure time; epoxy needs 12–24 hours before light foot traffic and up to 48 hours before vehicle traffic.

How soon can I walk or park my car on newly finished floors?+

For polished concrete, light foot traffic is usually possible the same day the final grit is complete — full furniture and rugs can go back within 24 hours. For epoxy and polyaspartic garage coatings, light foot traffic is typically safe within 12 hours and vehicle traffic within 48 hours, depending on product, temperature, and humidity. We give you exact walk-on and drive-on times for your specific system before we leave the job.

How do I properly clean and maintain polished concrete or garage epoxy?+

Dust mop or auto-scrub regularly and clean with a neutral pH cleaner — never acidic, citrus, or solvent degreasers, which etch polished concrete and dull epoxy topcoats. Blot spills promptly, avoid abrasive pads and power scrubbers, and place walk-off mats at entries to trap grit. For high-gloss polished floors, reapply a burnishing guard once a year; for epoxy, a clear re-topcoat every several years keeps it fresh. No waxing, stripping, or recoating is required for polished concrete.

Do you offer commercial, industrial, and residential concrete polishing in Knox County?+

Yes. We install commercial, industrial, and residential polished concrete and epoxy coatings throughout Knox County and the greater Knoxville metro — including Knoxville, Farragut, Powell, Maryville, Oak Ridge, Clinton, Alcoa, and surrounding areas in Anderson and Blount counties. Our in-house crews handle everything from single-car residential garages to 8,000+ sq ft warehouses, retail stores, restaurants, and manufacturing facilities. Every estimate is free and on-site.

Are your coatings resistant to garage oil spills, chemicals, and East Tennessee freeze-thaw cycles?+

Yes. Our high-solids epoxy and polyaspartic systems are engineered to resist motor oil, hydraulic fluid, road salt, solvents, and common shop chemicals — blot spills promptly and they will not stain or lift the coating. The seamless, non-porous surface also stands up to East Tennessee freeze-thaw cycling because there is no porous surface for moisture to enter and expand. For heavier chemical exposure we specify novolac or vinyl ester systems. Proper mechanical prep is what keeps the coating bonded through seasonal temperature swings.

Service areas near Knoxville

We install this system for homes and businesses across the greater Knoxville metro. Choose your community for localized information and a free on-site estimate.

Free estimate

Get a written square-foot price

Tell us about your slab, square footage, and timeline. We schedule an on-site walkthrough across Knoxville, Clinton, Oak Ridge, and the greater East Tennessee metro.

Call (865) 236-0833

Free on-site estimate

Get a free quote

9 + 5 =

We answer every request personally. Your details are never sold or shared.

Polished concrete in Farragut, built right

Free on-site estimates across Farragut, Concord, and west Knox County. Call (865) 236-0833.